IFTAComplianceA resource from TIN Comply
Template

IFTA trip sheet and distance record template

An IFTA trip sheet is the record of one trip by one vehicle: the dates, where it started and ended, the route, the odometer readings and the miles driven in each state or province. IFTA Procedures Manual P540.100 lists seven elements, and a distance record that has them and substantially documents your fleet's operation must be accepted by your base jurisdiction. Download it as Word or plain text and fill in one per trip.

Updated November 21, 2026Sources IFTA Procedures Manual P510, P520, P530, P540 and P560; IFTA Articles of Agreement R700 and R830
At a glance
Use
One sheet per vehicle, per trip
Elements
Seven, from P540.100
GPS records
A reading at least every 10 minutes (P540.200)
Keep
4 years from the due date or filing date, whichever is later

What it is for

Your IFTA return reports miles by jurisdiction, and those miles have to come from somewhere an auditor can check. IFTA Articles of Agreement R700 says “Every licensee shall maintain records to substantiate information reported on the tax returns”, and the IFTA Procedures Manual spells out the distance side in P540. A record with every P540.100 element “shall be accepted by the base jurisdiction as adequate under this article”, as long as the records together substantially document the fleet's operation.

That matters because of P520: “In an IFTA audit, the burden of proof is on the licensee”. A trip sheet filled in the day the trip ends is the cheapest proof you will ever have. The full set of records to keep is on IFTA record keeping; this page covers the distance record only. Fuel goes on the companion fuel receipt log. This template is general information, not legal or tax advice. Your base jurisdiction's own rules and forms come first, so check its manual before you rely on any line.

The template

Download .docxHighlighted text is what you replace.

Template from iftacompliance.com, based on IFTA Procedures Manual P510, P520, P530, P540 and P560; IFTA Articles of Agreement R700 and R830. Replace the highlighted text, check every line against your base jurisdiction's rules, and delete this note before you use it.

IFTA Trip Sheet and Distance Record

Carrier (IFTA licensee): [Legal name]
IFTA license no.: [License number] Base jurisdiction: [State or province]
Quarter: [Quarter and year]

Vehicle and trip

Vehicle unit no. or VIN: [Unit number or VIN]
Driver: [Driver name]
Trip start date: [Date] Trip end date: [Date]
Origin (city, state or province): [Origin]
Destination (city, state or province): [Destination]

Route of travel

Highways in the order driven: [For example I-80 E, I-35 S, US-69 S]
Stops and detours that changed the route: [Stops and detours, or None]

Distance readings

Device used (same device at both ends): [Odometer, hubodometer or ECM]
Beginning reading: [Reading at trip start]
Ending reading: [Reading at trip end]
Total trip distance (ending minus beginning): [Miles or kilometers]

Distance in each jurisdiction

List every state or province the vehicle was in, in the order driven. Count loaded, empty, deadhead and bobtail distance. Note any distance you will claim as exempt under that jurisdiction's own rule.

Jurisdiction 1: [State or province] Distance: [Miles] Exempt distance claimed and why: [Miles and reason, or None]
Jurisdiction 2: [State or province] Distance: [Miles] Exempt distance claimed and why: [Miles and reason, or None]
Jurisdiction 3: [State or province] Distance: [Miles] Exempt distance claimed and why: [Miles and reason, or None]
Jurisdiction 4: [State or province] Distance: [Miles] Exempt distance claimed and why: [Miles and reason, or None]
Jurisdiction 5: [State or province] Distance: [Miles] Exempt distance claimed and why: [Miles and reason, or None]
Jurisdiction 6: [State or province] Distance: [Miles] Exempt distance claimed and why: [Miles and reason, or None]

Sum of the jurisdiction lines: [Miles]
Matches the total trip distance: [Yes, or explain the difference]

Other details for this trip

Trip permit used: [Permit number and jurisdiction, or None]
Fuel bought on this trip is on the fuel receipt log: [Yes or No]
Notes: [Road closures, personal use, anything an auditor would ask about]

Sign-off

Completed by: [Name] Date: [Date]
Reviewed by: [Name] Date: [Date]

If a GPS or vehicle tracking system keeps this record

☐ A reading is recorded at least every 10 minutes while the engine is on.

☐ Each reading shows the date and time.

☐ Each reading shows latitude and longitude to at least 4 decimal places.

☐ Each reading shows the ECM odometer (or, with no ECM odometer, a beginning and ending dashboard odometer or hubodometer reading for the trip).

☐ Each reading shows the VIN or unit number.

☐ The data can be exported as XLS, XLSX, CSV or a delimited text file, not only as a PDF or an image.

How to use it

  1. Start a sheet when the truck leaves on a trip. Fill in the unit number or VIN, the start date and the origin.
  2. Read the odometer, hubodometer or ECM at the start and again at the end, using the same device both times. The difference is the total trip distance.
  3. Write the route as the highways you drove, in order. If you detour, note it, because an auditor checks your miles against the route.
  4. List every state or province you drove in, with the miles in each. Noting the odometer at each border crossing is one way to get those miles; P540 requires the miles, not the method.
  5. Count every mile: loaded, empty, deadhead and bobtail. Claim exempt miles only where that jurisdiction's own rule allows it, and write down why.
  6. Check that the jurisdiction lines add up to the trip total, sign the sheet and file it by vehicle and month.
  7. At month end, add the sheets into a summary for each vehicle, by jurisdiction. That summary feeds the quarterly filing checklist and the return.

Two rules shape the last steps. P560 says a “monthly summary of the fleet's operations reported on the corresponding quarterly tax return”, showing distance and fuel for each vehicle in total and by jurisdiction, may be needed for an efficient audit, and you must produce it on demand. And if your reporting period does not end exactly on the last day of the quarter, P540.300 allows small deviations only when, among other conditions, “the cut-off dates for both distance and fuel are the same”.

The P540 elements, line by line

Each line of the template maps to one element in IFTA Procedures Manual P540.100:

P540.100ElementWhere it goes on the template
.005Beginning and ending dates of the tripTrip start date and trip end date
.010Origin and destinationOrigin and Destination
.015Route of travelRoute of travel
.020Beginning and ending reading from the odometer, hubodometer, ECM or similar deviceDistance readings
.025Total distance of the tripTotal trip distance
.030Distance traveled in each jurisdiction during the tripDistance in each jurisdiction
.035Vehicle identification number or vehicle unit numberVehicle unit no. or VIN

Every mile counts toward the total. The return's total distance is reported “regardless of whether the miles or kilometers are taxable or nontaxable by a jurisdiction” (P710.100). Idaho's IFTA handbook is blunt about it: “You must document all distance, including nonrevenue (deadhead, bobtail, etc.) distance.”

Exempt miles need their own support. Toll road and off-highway exemptions differ by jurisdiction. Under R830.200, “the licensee is required to obtain the definition of operations that qualify for tax-exempt status from the jurisdictions of the Agreement”. The exempt column on the template is where that support starts; see taxable miles vs total miles.

A record missing an element is not automatically rejected. P530 judges records by sufficiency and appropriateness, and a record without every element may still be adequate depending on your operation. But a record with all seven elements is accepted by rule, which is why the template asks for all of them. Some base jurisdictions publish their own form; NCDOR's 2026 compliance manual, for example, includes an Individual Vehicle Distance Record in Appendix D. Either works if it carries the same elements.

GPS and tracking system records

If a vehicle tracking system creates the distance record, P540.200 applies instead of the paper elements. Since Ballot 1-2023 (effective January 1, 2024), “a record must be created and maintained at a minimum every 10 minutes when the vehicle's engine is on”, with the date and time, latitude and longitude to at least four decimal places, the ECM odometer reading and the VIN or unit number. The format matters as much as the data: “This data must be accessible in an electronic spreadsheet format such as XLS, XLSX, CSV or delimited text file”, and “Formats from a vehicle tracking system that provides a static image such as PDF, JPEG, PNG, or Word are not acceptable”.

An electronic logging device kept for hours of service is not an IFTA record by itself. The Texas DMV's apportioned registration page says: “There is no such thing as an IFTA- or IRP-certified ELD.” Check what your system exports against the checklist at the end of the template.

More on electronic records is on IFTA GPS and ELD records.

Sources

Questions filers ask

Do I need a trip sheet if my trucks have ELDs?

You need a distance record that meets P540. An ELD or GPS system can be that record only if it captures the P540.200 data (a reading at least every 10 minutes with date, time, latitude and longitude, ECM odometer and unit number) and exports it as a spreadsheet file. If it does not, keep trip sheets.

Do deadhead and bobtail miles go on the trip sheet?

Yes. Total distance on the IFTA return covers all miles by qualified vehicles, taxable or not, and Idaho's handbook says you must document all distance, including deadhead and bobtail.

Can I keep trip records in a spreadsheet instead of on paper?

Yes. P530 lets records be produced by any means and kept in any format the base jurisdiction can access, as long as they are adequate. If the base jurisdiction cannot audit them in the format you give, they count as not made available.

How long do I keep trip sheets?

Four years from the date the return was due or filed, whichever is later, plus any period covered by a waiver or jeopardy assessment (P510). A pending refund request extends it.

What if a trip sheet is missing the route or a reading?

Fix it from other records while you can, such as bills of lading, dispatch records or fuel receipts. Under P530 a record without every element may still be adequate, but the burden of proof is yours, and missing records can lead to an assessment.