- Notice
- At least 30 days before the audit, as a rule (A420.100)
- Burden of proof
- On the licensee (P520)
- Inadequate records
- MPG cut to 4.00, or reported MPG cut 20% (P570)
- Appeal
- At least 30 days after notice of findings (R1390)
What it is for
Under R1310, “The base jurisdiction shall audit its licensees on behalf of all member jurisdictions”, so one audit covers every jurisdiction on your returns. The IFTA Audit Manual sets the steps the auditor must follow, and the Procedures Manual sets the records you must keep. This checklist turns both into a to-do list from your side of the table. How audits are selected and run is covered on IFTA audits. This template is general information, not legal or tax advice. Your base jurisdiction's own rules and forms come first, so check its manual before you rely on any line.
The checklist
Template from iftacompliance.com, based on IFTA Audit Manual A310 to A460; IFTA Procedures Manual P510 to P570; IFTA Articles of Agreement R1210, R1310 and R1390; IFTA Ballot 3-2026. Replace the highlighted text, check every line against your base jurisdiction's rules, and delete this note before you use it.
IFTA Audit Readiness Checklist
Licensee: [Legal name] IFTA license no.: [License number]
Base jurisdiction: [State or province]
Audit contact at your company: [Name, phone, email]
Prepared by: [Name] on [Date]
1. When the audit notice arrives
☐ Date the notice was received: [Date]
☐ Audit period (quarters): [First quarter] to [Last quarter]
☐ Records the notice asks for: [List from the notice]
☐ Proposed audit start date: [Date]
☐ At least 30 days between the notice and the start date, unless you agree to an earlier start: [Yes or No]
☐ From January 1, 2027: sending the requested records before the start date can let the audit begin early. Decide before you send: [Send now or on the start date]
☐ Where the auditor will look at the records: [Your office, the base jurisdiction's office, or electronic]
☐ Records kept outside the base jurisdiction? Ask whether you will be billed for auditor travel: [Answer]
2. Records to have ready
☐ List of every vehicle operated in the audit period, with unit numbers and VINs, and the dates each was added or removed.
☐ How you get fuel (retail, fuel cards, bulk), the fuel types you use and the location of every bulk tank.
☐ Every return filed for the audit period, and any amended returns.
☐ Trip sheets or GPS data for every trip in the sample period, with all P540 elements.
☐ GPS or tracking data exported as a spreadsheet (XLS, XLSX, CSV or delimited text), not as PDF or images.
☐ Fuel receipts, invoices and fuel card transaction listings, with all P550.300 elements.
☐ Bulk tank records: delivery receipts, quarterly inventory reconciliations, tank capacities and withdrawal records.
☐ Monthly summaries of distance and fuel by vehicle and by jurisdiction, tied to each return.
☐ Support for every exempt or nontaxable mile claimed.
☐ Leases for leased vehicles and any trip permits bought.
☐ A short written description of how your distance and fuel records are produced and checked.
3. Self-check before the auditor does
☐ For each quarter, the summaries match the return. Differences and why: [Differences, or None]
☐ Pick one month and trace it: trip sheets to monthly summary to return. Result: [Result]
☐ Fleet MPG for each quarter compared. Unusual jumps or drops explained: [Explanation, or None]
☐ Every tax-paid gallon claimed has a receipt or listing. Gallons without proof: [Gallons, or None]
☐ Total fuel includes fuel with no receipt.
☐ Any change during the period in how you record distance or fuel is written down: [Changes, or None]
4. Opening conference
• Your operations: [Lanes, fleet size, owner-operators, bulk fuel]
• Your distance and fuel record system: [Who records, who checks, what software or forms]
• Sample period the auditor proposes: [Months]
• How sampling and projection will work: [Notes]
• Records the auditor still needs: [List]
5. If the auditor says records are inadequate
☐ Date of any written demand for records: [Date]. Deadline to respond (at least 30 days): [Date]
☐ Records you can still produce or rebuild from other sources (dispatch, bills of lading, fuel card data): [List]
☐ Possible assessment noted: fleet MPG reduced to 4.00 (1.70 KPL), or reported MPG reduced by 20 percent.
6. Closing conference and audit report
• Findings discussed: [Summary]
• Recommendations for your record system: [Summary]
• Audit report received on: [Date]
• Deadline to appeal in writing (at least 30 calendar days from notice of the findings; check your base jurisdiction's rule): [Date]
• Decision: [Pay, pay and appeal, or appeal]
• Changes made to your records after the audit: [Changes]
How to use it
- Once a year, run sections 2 and 3 on a recent quarter, as if an auditor had asked. Fix what you find before anyone else does.
- When a notice arrives, fill in section 1 the same day. The dates in the notice drive everything else.
- Gather the records in section 2 for the audit period, starting with the sample period if the notice names one.
- Prepare for the opening conference with section 4, and bring the written description of your record system.
- If the auditor says records are missing, use section 5 to track the written demand and what you can still produce.
- After the closing conference, record the report date and the appeal deadline in section 6.
The notice and the start date
IFTA Audit Manual A420.100 says “The licensee should be contacted at least 30 days prior to the conduct of an audit”, and the contact must tell you the audit period, the type of records to be audited and the proposed start date. Under A420.200 the audit can start inside the 30 days with your agreement or for just cause. From January 1, 2027, Ballot 3-2026 also lets it start early if “the licensee provides requested records”, so decide whether you want the full 30 days before you send anything.
Where the audit happens can cost money. Under P510, if your records are kept outside the base jurisdiction and its auditors travel to them, “the base jurisdiction may require the licensee to pay the base jurisdiction's reasonable per diem and travel expenses”.
What the auditor examines
The Audit Manual's preliminary steps (A310) tell the auditor to document your vehicles, how you obtain fuel, the types of fuel and the location of any bulk storage, and to analyze your returns and “note unusual trends or variances”. A320 then looks at your internal controls: “The auditor should compare the distance and fuel summaries provided by the licensee to the tax returns, and document any differences.” Under A330, “Unless a specific situation dictates, all audits will be conducted on a sampling basis.” That is why section 3 traces one month from trip sheets to the return and checks MPG from quarter to quarter.
The records themselves are the ones in P540 (distance), P550 (fuel) and P560 (monthly summaries). Format counts: “If records are presented in a format or in a manner in which the base jurisdiction cannot audit them, they have not been made available as required” (P530). The trip sheet and fuel receipt log templates carry every element, and IFTA record keeping explains each one.
What inadequate records cost
If the base jurisdiction finds your records inadequate for the fleet as a whole, or you produce none after a written demand, P570.100 requires an additional assessment by “reducing the licensee's reported fleet MPG to 4.00 or 1.70 KPL”, or by cutting your reported fuel consumption factor by 20 percent (and, for distance-based taxes, raising jurisdiction distance by 20 percent). Before that assessment, R1210.200 requires a written request for records “giving the licensee thirty (30) days to provide the records or to issue a notice of insufficient records”. Missing fuel receipts are handled separately: the tax-paid credit is denied, but A360 says that alone does not reduce your reported total fuel. The full rules are on IFTA assessments when records are missing.
A 4.00 MPG assessment can turn an efficient fleet's credit into a large balance due, because every taxable mile is divided by a lower MPG. The cheapest defense is a quarter's records that already tie to the return before the notice arrives.
The report and your appeal
A450 calls for a documented closing conference where “any areas of noncompliance, and any requirements and recommendations for improvement” to your distance and fuel systems are discussed. The base jurisdiction then sends a written audit report to you and to every affected jurisdiction (A460, R1370). R1390 gives you “at least 30 calendar days from the date the licensee is notified of the findings of an audit” to file a written appeal with the base jurisdiction, under its own appeal procedures. Interest and penalties on audit findings are explained on IFTA penalties and interest.
Sources
- IFTA Audit Manual A310, A320, A330, A360, A420, A440, A450 and A460, effective August 2026: IFTA, Inc. manuals page
- IFTA Procedures Manual P510, P520, P530, P540, P550, P560 and P570, effective August 2026
- IFTA Articles of Agreement R1210, R1310, R1370 and R1390, effective August 2026
- IFTA Ballot 3-2026 (A420.200), passed at the 2026 Annual Business Meeting, effective January 1, 2027: IFTA, Inc. ballots page
Questions filers ask
How much notice do I get before an IFTA audit?
A420.100 says the licensee should be contacted at least 30 days before the audit. It can start sooner with your agreement or for just cause, and from January 1, 2027, if you provide the requested records early.
Who has to prove the numbers on my returns?
You do. P520 puts the burden of proof in an IFTA audit on the licensee, and the audit is completed using the best information available to the base jurisdiction.
What happens if I cannot produce my records?
After a written request giving you 30 days, the base jurisdiction can assess on its best information. Under P570, that means reducing your fleet MPG to 4.00 (1.70 KPL) or cutting your reported MPG by 20 percent.
Does the auditor look at every trip?
Usually not. A330 says audits are conducted on a sampling basis unless a specific situation dictates otherwise, and the sample period must be representative of your operations.
How long do I have to appeal an IFTA audit?
At least 30 calendar days from the date you are notified of the findings, under R1390. The appeal goes to your base jurisdiction and follows its own procedures, so check its deadline on the report.