It must also run in two or more member jurisdictions, hauling property or passengers for hire. Trailers are not apportioned; they travel under reciprocity. IRP Plan Article II, Apportionable Vehicle; Section 515.
The Plan's definition
Article II of the IRP Plan defines the vehicle the whole Plan is built around. An apportionable vehicle is “any Power Unit that is used or intended for use in two or more Member Jurisdictions and that is used for the transportation of persons for hire or designed, used, or maintained primarily for the transportation of property”, and that also meets one of three weight or axle tests. A power unit is a motor vehicle, but not an automobile or motorcycle, as distinguished from a trailer, semi-trailer or auxiliary axle.
So four things must line up: it is a power unit, it travels or is meant to travel in two or more member jurisdictions, it carries property or carries people for hire, and it passes one of the tests below. Federal law borrows this definition: for IRP purposes, a "commercial motor vehicle" means an apportionable vehicle as the Plan defines it (49 U.S.C. 31701(1)(A))49 U.S.C. 31701United States Code, Cornell LII.
The three weight and axle tests
| Test | Plan text (Article II) | What it means for you |
|---|---|---|
| (i) Two axles | Two axles and a gross vehicle weight or registered gross vehicle weight in excess of 26,000 pounds (11,793.401 kilograms) | A two-axle straight truck or tractor counts once its actual or registered gross weight is over 26,000 lb. Exactly 26,000 lb does not. |
| (ii) Three or more axles | Three or more axles, regardless of weight | A power unit with three or more axles counts at any weight. |
| (iii) Combination | Used in combination, when the gross vehicle weight of such combination exceeds 26,000 pounds | A lighter power unit counts when it pulls a trailer and the combination grosses over 26,000 lb. |
Test (ii) counts the axles of the power unit itself. A trailer's axles come in only through the combination weight in test (iii). Base jurisdiction pages restate the tests in their own words: the Texas IRP packet uses 11,794 kilograms, and ADOT's motor carrier page says a gross vehicle weight rating of 26,001 pounds or more. The Plan text, above, is the rule.
The weight you declare matters beyond the eligibility test. Your cab card shows the registered weight (or combined axles) for every member jurisdiction (Section 610), and the base jurisdiction may ask for proof of actual operations if you ask for weights that differ by more than 10 percent between jurisdictions that register by gross weight (Section 325). The highest weight you declare also sets your Form 2290 category; see Form 2290 taxable gross weight.
Two or more member jurisdictions
A truck that only ever runs inside one state is not apportionable, whatever its weight. It registers under that state's ordinary law. The Plan looks at intent as well as history. The commentary to the definition says intent to operate in two or more member jurisdictions is an objective fact, judged from all the circumstances of the case, and that a vehicle not used in more than one jurisdiction for a whole registration year plus six more months “gives rise to a presumption that the Registrant did not intend to use the Vehicle in more than one Member Jurisdiction”. You can rebut that presumption with other facts.
Base jurisdictions check this. Texas says “An apportioned registrant must operate all apportioned vehicles interstate”, and a Texas fleet that ran no actual distance must later document its intent to travel between jurisdictions.
Property or passengers for hire
A truck qualifies if it is designed, used or maintained primarily to carry property, whether you haul for hire or carry your own goods. A passenger vehicle qualifies only when it carries people for hire, such as a charter or scheduled bus. Buses that run in a pool may compute fees from scheduled route distance instead of actual distance (Section 805).
What counts as an axle
The Plan defines an axle as an assembly of two or more wheels that carries part of the vehicle's weight to the road, and adds that for registration an axle is any such assembly “whether or not it is load-bearing only part of the time”. The commentary gives the common case: a single-unit truck with a steering axle and two rear axles is apportionable “even though one of the rear Axles is a so-called “dummy,” “drag,” “tag,” or “pusher” type Axle”. A lift axle counts.
Trailers and semi-trailers
Trailers are not apportioned. The commentary to the definition says “Trailing equipment, however, is only registered under the Plan pursuant to an approved Exception” (or under the rental utility trailer rule in Section 910), and Appendix B lists no exceptions. Instead, Section 515 gives trailers reciprocity: a trailer, semi-trailer or auxiliary axle “properly registered in any Jurisdiction shall be granted full and free Reciprocity”, and every trailer pulled by an apportioned power unit gets the same. No member may make you register trailers in any proportion to your apportioned power units (Section 515(c)).
Your trailer still needs a registration from some jurisdiction. ADOT puts it this way: trailers and semitrailers “don't require apportioned registration but do require current registration from any state to operate on Arizona highways”. Texas, for example, offers multi-year token trailer registration for semi-trailers over 6,000 pounds (TxDMV commercial fleet registration page).
Vehicles left out, and opting in
Even if it passes a test, a vehicle is not apportionable if it is a recreational vehicle, a vehicle displaying restricted plates, or government-owned. A recreational vehicle is one used for personal pleasure or travel and not in connection with any commercial endeavor. A restricted plate is one with a time, area, distance or commodity restriction, such as a farm plate, as the issuing jurisdiction defines it. The Texas IRP packet also lists city pick-up and delivery vehicles and antique or historical vehicles among those that do not require apportioned registration.
Lighter vehicles can join by choice. The definition ends with an exception: a power unit, or a combination, of 26,000 pounds or less “may be registered under the Plan at the option of the Registrant”. Carriers with a mixed fleet sometimes do this so every truck carries the same credentials. Vehicles that are not apportioned register under each base jurisdiction's regular laws and may get reciprocity in other jurisdictions under separate agreements (commentary to the definition). Some states also offer a nonresident option: ADOT issues interstate registration to out-of-state operators “who are conducting interstate operations and don't qualify or don't want to register under IRP”.
Examples
Each example assumes the vehicle runs in two or more member jurisdictions.
| Vehicle | Apportionable? | Why |
|---|---|---|
| Two-axle box truck, 24,000 lb gross, running alone | No (optional) | Two axles and not over 26,000 lb; may be apportioned by choice |
| Two-axle box truck registered at 33,000 lb | Yes | Test (i): two axles and over 26,000 lb |
| Three-axle dump truck at any weight, hauling the owner's materials | Yes | Test (ii): three or more axles, used for property |
| Two-axle truck, 16,000 lb alone, pulling a trailer to 30,000 lb combined | Yes | Test (iii): combination over 26,000 lb |
| Tandem-axle tractor running bobtail between loads | Yes | Test (ii) applies to the tractor alone |
| Motor home used only for family travel | No | Recreational vehicle |
| Farm truck on a restricted farm plate | No | Restricted plate, as the issuing jurisdiction defines it |
| 53-foot semi-trailer | No | Trailers get reciprocity under Section 515; register it in any jurisdiction |
How the IRP test compares with IFTA's
IFTA uses nearly the same thresholds for a "qualified motor vehicle" (IFTA Articles of Agreement R245): two axles and over 26,000 pounds or 11,797 kilograms, three or more axles regardless of weight, or a combination over that weight. Most trucks that need apportioned plates also need an IFTA license and decals. The differences are at the edges. IRP lists its own exclusions (restricted plates, government-owned vehicles) and its own passenger rule (persons for hire), while IFTA has its own exemptions. IFTA's test is explained on who needs an IFTA license.
In both programs, the three-axle test is about the power unit. Adding a two-axle trailer to a two-axle truck does not make the truck a "three-axle" vehicle; the combination counts only if its gross weight is over 26,000 pounds.
This page is general information about the International Registration Plan, not legal advice. Your base jurisdiction's own law, forms and instructions also apply.
Questions filers ask
Is a truck at exactly 26,000 pounds apportionable?
Not under the two-axle test, which requires a gross or registered gross weight in excess of 26,000 pounds. You may still choose to apportion it, and it is apportionable if it has three or more axles or pulls a combination over 26,000 pounds.
Do trailer axles count toward the three-axle test?
No. Test (ii) is about the power unit's own axles. A trailer matters only through test (iii), the combination's gross weight over 26,000 pounds.
Does a lift or tag axle count?
Yes. The Plan counts an axle whether or not it is load-bearing only part of the time, and the commentary names dummy, drag, tag and pusher axles.
Do I need apportioned plates on my trailers?
No. Trailers are not apportioned. A trailer properly registered in any jurisdiction gets full and free reciprocity under Section 515, including when an apportioned power unit pulls it.
Can I put a light truck on IRP?
Yes. The definition lets a power unit or combination of 26,000 pounds or less be registered under the Plan at the registrant's option.
Does a private bus need IRP?
The definition covers passenger vehicles that carry persons for hire. A bus that does not carry passengers for hire falls outside it and registers under regular state law; check your base jurisdiction's rules.